Hydrogen Peroxide Catalysts

Hydrogen Peroxide Catalyst is a new type of ammonia decomposition hydrogen production catalyst with nickel as the active component, alumina as the main carrier and special additives added.

Inquire Now Next Product

Product introduction

Hydrogen Peroxide Catalyst is mainly used in ammonia decomposition hydrogen production unit. Long-term use has proved that the product has stable performance, good activity and high strength

Heat Resistance:It can operate at 1200°C for a long time, does not melt, shrink, or deform at 1400°C, whicch has a stable structure and good strength during high-temperature operation

Product Basic Info

Physical and Chemical Properties

Item	Index
Size（mm）	19 × 19 × 9
Bulk Density，Kg/L	0.9~1.0
Chemical Composition， ( % )	NiO ≥ 14.00 Margin：AI2O3＋Additives
Loss on Ignition,(%)	≤20
Particle Radial Crushing Strength（Average Value）， N/Grain	≥ 300
Percentage of Low Strength Particles（The Percentage of Particles below 180N/Particle）	≤5.0%
Heat Resistance Index	Calcined at 1300°C for 2 hours, no Adhesion and Fragmentation

Product Specification

Reference Operating Conditions (Ammonia Decomposition):

Item	Index
Pressure	0.01Mpa - 0.10MPa
Temperature	750℃-850℃
Ammonia Space Velocity	350 hr-1
Ammonia Decomposition Rate	99.99％（min）