Home > Products > Catalyst > Oil Refining Catalyst

GCR Continuous Reforming Catalyzer

GCR catalyzer can be used for the reforming process of high octane gasoline, aromatics and hydrogen productions which using straight-run naphtha, hydrocracked heavy naphtha, pyrolysis gasoline, coker gasoline, catalytic gasoline and condensate oil etc as raw materials.


Product introduction 

The adoption of new catalytic material for GCR continuous reforming catalyzer makes the ability of resisting high temperature hydrothermal treatment is improved, descent rate of specific surface area reduced slowly, service life is twice than original one, economical efficiency of catalyst increased greatly.

 

At the same time, the retention ability of Chlorine is increased, the injected amount of Chlorine in the system reduce to 50% than before, corrosion of Chloride to downstream devices.

 

In addition, the mechanical strength of catalyst was improved and keeping good wearability, reduced the amount of dust during the processing of circulation and transportation.


The catalyzer used in methane oxidation and reformed gas reactions are mainly supported metal catalysts, and their metal active components are divided into two categories: noble metals such as Pd, Ru, Rh, Pt, Ir, etc. and non-precious metals such as Ni, Co, Fe, etc. Ⅷ Group transition metals.


 


Product Basic Info
Product Specification
CONTACT US
  • E-mail: info@sd-avant.com
  • Tel.: +86 533 2802 131
  • Fax: +86 533 2802 131
  • QQ: 499093556
  • Add.: Room 811, Chuangye Building, Beijing Road, Zhangdian, Zibo, Shandong, China 255000
FOLLOW US